V102 Vinyl Surface Mount Drapery Track

Vinyl hand-drawn track is normally affixed directly to ceiling surface using screws or M-123 mounting clips. 

Description:
Extruded PVC track is high gloss, durable, and able to withstand nailing, stapling, and pneumatic die cutting. Track comes in standard 12 ft lengths but can be cut to length for an additional charge.

Installation: 
Track should be mounted to wood using standard fasteners, or to plaster using #6, #8, or #10 screws, positioned 4" apart. Installation should allow 1/4" clearance between track end and end wall. Install carriers, gliders, or sew-on tabs at 3" on center. Draperies should be attached starting at the center, removing or adding carriers as needed at the notches on either end of the track. Complete installation using M-114 or M-115 end stops.