Call: (931) 389-6444
Plastic and Aluminum Moldings for the air plane industryMoldings for the RV IndustryModlings for the Boat Industry Moldings for the automobile industry
Yachts, private aircraft, recreation vehicle drapery hardware and automotive small plastic parts

V100 Vinyl Vertical Mount Drapery Track

Vinyl, hand-drawn track with vertical flange is normally affixed directly to wall using standard fasteners,  This track can also be recessed, depending on the application.


Extruded PVC track is high gloss, durable, and able to withstand nailing, stapling, and pneumatic die cutting. Track comes in standard 12 ft lengths but can be cut to length for an additional charge.


Track should be mounted to wood using standard fasteners, or to plaster using #6, #8, or #10 screws, positioned 4" apart. Installation should allow 1/4" clearance between track end and end wall. Install carriers, gliders, or sew-on tabs at 3" on center. Draperies should be attached starting at the center, removing or adding carriers as needed at the notches on either end of the track. Complete installation using M-114 or M-115 end stops.

 Height: 0.700" ,   Width: 0.340"