Call: (931) 389-6444
Plastic and Aluminum Moldings for the air plane industryMoldings for the RV IndustryModlings for the Boat Industry Moldings for the automobile industry
Yachts, private aircraft, recreation vehicle drapery hardware and automotive small plastic parts

A104 Aluminum Architectural Drapery Track

Aluminum hand-drawn track is normally affixed directly to ceiling surface using standard fasteners. Track can be curved to 8"-12" radius.

Extruded 6063-T5 aluminum track is etched, anodized, and siliconized. Clear satin finish is rust proof and chip proof.  Track comes in 14 ft standard lengths, but can be cut to length for an additional charge. Comparable to Kirsch™ 9046 track.

Track should be mounted to wood using standard fasteners, or to plaster using #6, #8, or #10 screws, positioned 4" apart.  Track installation should allow 1/2" clearance between track end and end wall. Install carriers at 3" on center and attach draperies starting at the center, removing or adding carriers as needed at either end of the track.

Channel Height: 0..400”

Channel Width: 0.500”

Total Height: 0.500"

Total Width" 0.620”